Light beneath the wall cap
1 productFit hardscape lights under a suitable cap so the beam falls down the face of the retaining wall or onto the edge below.
Hardscape Light — 12 Lights
12 lights · Transformer not included
Choose your option
Confirm plate clearance and the cable route. Choose the transformer option for the exact pack.
Mark the posts
3 productsChoose a half-moon, square or cylinder light to surface-mount on suitable posts or rails. Half-moon lights use a 12 V landscape run; square and cylinder kits use their own matching supplies.
Rail Light, Half-Moon — 2.5 W
Choose your option
Square Rail Light — 3 W
Choose your option
Cylinder Rail Light — 5CCT
Choose your option
Aim the light toward your space and check glare from neighboring windows.
Trace a timber edge
1 productUse recessed lights in suitable vertical timber trim or risers at the boundary where a flush fitting is preferred.
Recessed Deck Light — 16-Light Kit
Choose your option
Allow room for the fitting and connectors. Use the included 12 V DC supply as a separate run.
Where to Put Landscape Lights, One Part of the Yard at a Time
Before the cap goes on
Plan the light and the cable together.
The mounting position decides where the beam falls and where the cable can run. Check the underside of the cap, access for maintenance, and the view from both sides of the boundary.
