Low Voltage Landscape Wire, Pure Copper Direct Burial Cable

Main wire is used as the primary cable from the transformer. Tap wire connects individual lights to the main run. Extension wire helps extend the distance between fixtures or connection points.

Yes. Outdoor landscape lighting wire is designed for direct burial when installed properly. For best results, bury it deep enough to avoid damage from gardening tools or foot traffic.

Choose the wire gauge based on total wattage and cable run length. Lower gauge numbers, such as 12 AWG, are thicker and better for longer runs or higher loads. 16 AWG is often used for shorter runs or smaller systems.

Yes. It is compatible with most standard 12V low voltage landscape lighting systems, including spot lights, path lights, well lights, deck lights, and transformers.

Yes. You can cut the wire to the length needed for your installation. Make sure all cut ends and connections are properly sealed with waterproof connectors.

Yes. For outdoor and direct-burial installations, waterproof connectors are strongly recommended to prevent moisture, corrosion, and connection failure.

Yes. Quality landscape lighting wire is made with durable outdoor-rated insulation to resist moisture, sunlight, temperature changes, and normal outdoor conditions.

The maximum run length depends on wire gauge, total wattage, transformer output, and voltage drop. For longer runs, use thicker wire such as 12 AWG and avoid overloading the transformer.

Yes. Thicker wire, such as 12 AWG, has lower resistance and helps reduce voltage drop, especially on long cable runs or systems with multiple fixtures.

Yes. Use outdoor-rated low voltage wire that matches your system requirements. Always follow local electrical codes and use proper connectors for safe installation.

Yes. It can be used for many low voltage outdoor lighting projects, as long as the voltage, load, and installation environment match the wire rating.